6 Row
Sugarbeet Harvester
Features & Specs
2900 Series offers high capacity yields for Western Soils
Simple, Reliable Design
Tractor Requirements:
- 150 to 180 horsepower
4-Ton Hopper with 48″ Discharge
The Parma® Sugarbeet Harvester comes with the 6-Row in its various series.
The 2900 Series, rear squeeze chain elevator model is designed for simplicity and high capacity in the heavier yields in the western soils. The six-grabroll (Model 2960) and the eight-grabroll (Model 2980) cleaning bed provide optimum cleaning of the beets without excessive chipping and tail loss.
The 2700 Series, rear squeeze chain elevator model is specifically designed for the heavy gumbo mud of the Red River Valley of North Dakota and Minnesota to provide extreme cleaning with the high-capacity eight-grabroll bed
2960 SERIES
• 2964 – 4 Row 24-30″ Row Spacing
• 2966 – 6 Row 19-24″ Row Spacing
• 145 Inch inside frame dimension
• 6 Roll-Grabroll adjustable cleaning bed
• Four – Groove B Notched belt, dual side drive
2980 SERIES
• 2986 – 6 Row 28-30″ Row Spacing
• 2988 – 8 Row 19-22″ Row Spacing
• 190 Inch inside frame dimension
• 8 Roll-Grabroll adjustable cleaning bed
• Six – Groove B Notched belt, dual side drive
STANDARD EQUIPMENT FOR ALL SERIES
• Cast Alloy steel Lifter Wheels with Filler tabs and Driving lugs
• Rubber Backing on paddles
• 1 3/4″ Head shafts on Elevator drives
• Holding Tank, approx. 4-Ton capacity 55″ wide with 48″ x 56mm pitch belted chain
• Fold down discharge elevator with dual cylinders
• 43 1/2″ Wide “High Capacity” rear Elevator with 42″ x 56mm pitch belted chain
• RC 80 Drives throughout
• Wide open front end for great visibility into the Lifter Wheels
• Two, 3000 PSI Hydraulic Lift cylinders
• Heavy Duty tongue swivel hitch
• Halogen Working & Caution lights
• Hose Kit for Tractor hook-up
GRABROLLS
• 6 to 8 Roll Grabrolls with 3 to 4, Full width, Directional spiraled, on 6″ Steel Pipe
• Hard Surfaced on all Spiral wrap
• 2 to 3 Full width smooth rolls with 5″ sch. 80 Steel Pipe
• Two, half (split) rear smooth rolls with 5″ sch 80 Steel pipe
• 1-15/16″ Welded stub shafts
• Triple Lipped Sealed Bearings
• Adjustable, urethane cushioned hangers
ADD ONS AND OPTIONS
• “Narrow Row” Lifter Wheel strut – or – the Standard wide row config.
• Rock Protection cushioned – or – Standard Non-rock units
• Rear carrier wheels with dual 24″ or single 21.5 x 16.1 Flotation lug tires on steerable – or – Rigid Struts
• 2-Way Steering with return to straight
• Powered by combination Mechanical/Tractor Hydraulics – or – Mechanical/Self-Contained system
• Driven by CV PTO – or – Standard non-CV
• In Cap electrical solenoid control valve (2-Bank through 5-Bank)
• Rear Elevator chain scrub-mode sprocket kit
• Rear Elevator ladder & Platform
• Grabroll Mud Flap Kit
Model 2966
Row Spacing: 6-Row 19” to 24”
PTO HP Required: 150 hp min.
Grabrolls: 6 w/split rear roll
Belt Drive – B Notched: 4 Groove Powerband
Frame Width: 13’ 3”
Towing Width: 15’1 (14’6” boom rem.)
Shipping Width – Front to rear – Tongue Removed: 13’ 3”
Shipping Width – Front to rear – Elev. removed: 12’ 8”
Weight:17250 lbs
Model 2986
Row Spacing: 6-Row 28” to 30”
PTO HP Required:175 hp min.
Grabrolls: 8 w/split rear roll
Belt Drive – B Notched:6 Groove Powerband
Frame Width: 17’2″
Towing Width: 18’8″
Shipping Width – Front to rear – Tongue Removed: 13’11 3/9″
Shipping Width – Front to rear – Elev. removed: 13’5″
Weight:19,500 lbs
Model 2988
Row Spacing:8-Row 19” to 22 ”
PTO HP Required:180 hp min.
Grabrolls: 8 w/split rear roll
Belt Drive – B Notched: 6 Groove Powerband
Frame Width: 17’2″
Towing Width: 18’8″
Shipping Width – Front to rear – Tongue Removed: 13’11 3/4″
Shipping Width – Front to rear – Elev. removed: 13’5″
Weight: 20,750 lbs
CONTACT US FOR SUPPORT
Call, Email, or Leave a short message on our Contact us page and we will answer any questions you might have.
Call (208)722-5116
PARTS
Find and order Points, S-Tines, Bearings, and other common parts. We will ship it the same day of order if in stock. For other parts and more info please call.
OPERATORS MANUALS
View a list of all our manuals for every year model you might have.
PICTURES & VIDEOS
Look through pictures of different size models, features, & rollers. Also watch videos of the Parma Rollaharrow in action.
Special Features
Grabrolls
6 or 8 Total Depending on model:
• 4 or 6 Groove Belts with dual side drive for machine power transfer
• PTO to Gearbox to Belt Driven
Rear Elevator
6 Row with 42″ and 8 Row with 48″ Belted Chain For High Capacity
