6 Row
Sugarbeet Harvester

Features & Specs

2900 Series offers high capacity yields for Western Soils

Simple, Reliable Design

Tractor Requirements:

150 to 180 horsepower

 

 

Pricing and Availability

 

4-Ton Hopper with 48" Discharge

Overview

Features

Specifications

Support

The Parma® Sugarbeet Harvester comes with the 6-Row in its various series.

 

The 2900 Series, rear squeeze chain elevator model is designed for simplicity and high capacity in the heavier yields in the western soils. The six-grabroll (Model 2960) and the eight-grabroll (Model 2980) cleaning bed provide optimum cleaning of the beets without excessive chipping and tail loss.

 

The 2700 Series, rear squeeze chain elevator model is specifically designed for the heavy gumbo mud of the Red River Valley of North Dakota and Minnesota to provide extreme cleaning with the high-capacity eight-grabroll bed

  • 2960 SERIES

    •  2964 - 4 Row 24-30" Row Spacing
    •  2966 - 6 Row 19-24" Row Spacing

    •  145 Inch inside frame dimension

    •  6 Roll-Grabroll adjustable cleaning bed

    •  Four - Groove B Notched belt, dual side drive

  • 2980 SERIES

    •  2986 - 6 Row 28-30" Row Spacing
    •  2988 - 8 Row 19-22" Row Spacing

    •  190 Inch inside frame dimension

    •  8 Roll-Grabroll adjustable cleaning bed

    •  Six - Groove B Notched belt, dual side drive

  • STANDARD EQUIPMENT FOR ALL SERIES

    •  Cast Alloy steel Lifter Wheels with Filler tabs and Driving lugs
    •  Rubber Backing on paddles
    •  1  3/4" Head shafts on Elevator drives

    •  Holding Tank, approx. 4-Ton capacity 55" wide with 48" x 56mm pitch belted chain

    •  Fold down discharge elevator with dual cylinders

    •  43 1/2" Wide "High Capacity" rear Elevator with 42" x 56mm pitch belted chain

    •  RC 80 Drives throughout

    •  Wide open front end for great visibility into the Lifter Wheels

    •  Two, 3000 PSI Hydraulic Lift cylinders

    •  Heavy Duty tongue swivel hitch

    •  Halogen Working & Caution lights

    •  Hose Kit for Tractor hook-up

  • GRABROLLS

    •  6 to 8 Roll Grabrolls with 3 to 4, Full width, Directional spiraled, on 6" Steel Pipe

    •  Hard Surfaced on all Spiral wrap
    •  2 to 3 Full width smooth rolls with 5" sch. 80 Steel Pipe

    •  Two, half (split) rear smooth rolls with 5" sch 80 Steel pipe

    •  1-15/16" Welded stub shafts

    •  Triple Lipped Sealed Bearings

    •  Adjustable, urethane cushioned hangers

  • ADD ONS AND OPTIONS

    •  "Narrow Row" Lifter Wheel strut - or - the Standard wide row config.
    •  Rock Protection cushioned - or - Standard Non-rock units
    •  Rear carrier wheels with dual 24" or single 21.5 x 16.1 Flotation lug tires on steerable - or - Rigid Struts

    •  2-Way Steering with return to straight

    •  Powered by combination Mechanical/Tractor Hydraulics - or - Mechanical/Self-Contained system

    •  Driven by CV PTO - or - Standard non-CV

    •  In Cap electrical solenoid control valve (2-Bank through 5-Bank)

    •  Rear Elevator chain scrub-mode sprocket kit

    •  Rear Elevator ladder & Platform

    •  Grabroll Mud Flap Kit

Specification

Model 2966

Model 2986

Model 2988

Row Spacing

 

PTO HP Required

 

Grabrolls

 

Belt Drive - B Notched

 

Frame Width

 

Towing Width

 

Shipping Width - Front to rear - Tongue Removed

 

Shipping Width - Front to rear - Elev. removed

 

Weight

 

6-Row 28” to 30”

 

175 hp min.

 

8 w/split rear roll

 

6 Groove Powerband

 

17'2"

 

18'8"

 

13'11  3/9"

 

 

 

13'5"

 

 

19,500 lbs

6-Row 19” to 24”

 

150 hp min.

 

6 w/split rear roll

 

4 Groove Powerband

 

13’ 3”

 

15’1 (14’6” boom rem.)

 

13’ 3”

 

 

 

12’ 8”

 

 

17250 lbs

8-Row 19” to 22 ”

 

180 hp min.

 

8 w/split rear roll

 

6 Groove Powerband

 

17'2"

 

18'8"

 

13'11  3/4"

 

 

 

13'5"

 

 

20,750 lbs

Overall Height:    13 feet & 6 inches

Shipping Height - Wheels & Top Sprocket removed:  12 Feet & 8 Inches

Rear Elevator Chain:  1/2 x 42 x 56mm Belted with overlap Splicing

Center Boom Height:       10 Feet & 5 Inches

 

Hopper Chain:  1/2 x 48 x 56mm Belted with overlap Splicing

 

Lifter Wheels:  28" Cast Alloy steel with Driving lugs & Filler Tabs

Tank Holding Capacity:  Approximately 4 Tons

Grabroll Bearings:  1 15/16" Triple Lipped

Rear Carrier Tires:  11.2 x 24" Lugged (21.5 x 16.1 Flotation Optional)

CONTACT US FOR SUPPORT

OPERATORS MANUALS

Call, Email, or Leave a short message on our Contact us page and we will answer any questions you might have

View a list of all our manuals for every year model you might have

PARTS

PICTURES & VIDEOS

Find and order Bearings, Belts, Rollers, and other common parts. We will ship it the same day of order if in stock. For other parts and more info please call.

Look through pictures of the 6-Row, its features, & capabilities. Also watch videos of the Parma 6-Row Sugarbeet Harvester in action

Roller Options

Grabrolls

8 Total:

•  Back Grabroll is Full Length
  PTO Driven

Lifter Wheels

56" Belted Chain For High Capacity

 

Copyright © Parma Company 2015 All rights reserved