12 Row
Sugarbeet Harvester

Features & Specs

  • Split Grabrolls with Rear Full-Length Spiral - Cushioned - Adjustable

  • Simple, Reliable Design

  • Tractor Requirements:
    320 horsepower minimum
    20 GPM @ 3,000 PSI Hydraulics

  • Steerable Rear Flotation Tires

 

Pricing and Availability

 

4-Ton Hopper with 48" Discharge

Overview

Features

Specifications

Support

Parma 12 Row Sugarbeet Harvester

 The simplicity of the Parma 12-row Sugarbeet Harvester sets it apart from the competition with its’ unique design of the grabroll bed.  The full-width spiral Grabroll across the back eliminates all bearing hangers or brackets under the Grabrolls reducing trash and mud build-up.  An overall front to rear dimension of less than 20 ft long allows for quick turnaround times without the need for large headlands.

The Sugarbeets are lifted directly onto the cleaning rolls which then convey them across the grabroll bed into the large 58” rear squeeze chain elevator.  This proven design eliminates the need for extra chains, transfer rolls and the massive chipping while still maintaining the same great cleaning capacity.  The large 4-plus ton hopper provides just the right balance and the lighter weight allows for four evenly spaced rear flotation carrier wheels for stability and consistent row depth from side to side.

 

  • 12228 SERIES

    • 29683 - 8 Row 30" Row Spacing
    • 12228 - 12 Row 22" Row Spacing

    • 19 ' 1" Front to Back (Tongue Included)
    • 8 Roll - Grabroll adjustable cleaning bed
    • Six Groove 5V Notched belt, dual side drive
    • Spring Loaded, Easy adjustable, drive Belt Idlers
    • PTO Driven Grabroll bed & Paddle shaft
    • Hydraulic driven Rear Elevator & Discharge Boom
    • Heave Duty Dual Rear Carrier Wheel Struts
      • 4 ea. 21.5 x 16.1 Lug Flotation Tires
      • 2 Way Steerable
    • Rock Protected Lifter Wheel Strut & Grabroll
    • 58 " Elevator Throat
    • High Capacity Rear Squeeze Elevator
  • STANDARD EQUIPMENT FOR ALL SERIES

    • Cast Alloy steel Lifter Wheels with Filler tabs and Driving lugs
    • Rubber Backing on paddles
    • 1  ¾" Head shafts on Elevator drives
    • Holding Tank, approx. 4-Ton capacity 55" wide with 48" x 56 mm pitch belted chain
    • Fold down discharge elevator with dual cylinders
    • 58" Wide "High Capacity" rear Elevator with 56" x 56 mm pitch Triple belt, Belted Chain
    • RC 80 Drives throughout
    • Wide open front end for great visibility into the Lifter Wheels
    • Two, 3,000 PSI Hydraulic Lift cylinders
    • Heavy Duty tongue swivel hitch (CAT 4)
    • LED Working & Caution lights
    • Hose Kit for Tractor hook-up
  • GRABROLLS

    • 8 Roll Grabrolls with 3 Split, Directional spiraled, on 6" Steel Pipe
    • Rear Spiral full width on 6" sch. 120 pipe
    • Hard Surfaced on all Spiral wrap
    • 3 Split smooth rolls with 5" sch. 80 Steel Pipe
    • Two, half (split) rear smooth rolls with 6" sch 40 Steel pipe
    • 2-3/16" Welded stub shafts
    • Triple Lipped Sealed 2 3/16" Bearings
    • Adjustable, Spring cushioned hangers
  • ADD ONS AND OPTIONS

    • "Narrow Row" Lifter Wheel strut - or - the Standard wide row configuration.
    • Powered by combination Mechanical/Tractor Hydraulics - or - Mechanical/Self-Contained system
    • Driven by CV PTO - or - Standard non-CV
    • In Cap electrical solenoid control valve (3-Bank through 5-Bank)
    • Rear Elevator chain scrub-mode sprocket kit
    • Rear Elevator ladder & Platform
    • Grabroll Mud Flap Kit
    • Rowfinder or Tongue Cylinder Kit

Specification

Model 12228

Row Spacing

 

PTO HP Required

 

Grabrolls

 

Belt Drive - 5V Notched

 

Frame Width

 

Towing Width

 

Shipping Width - Front to rear - Tongue Removed

 

Shipping Width - Front to rear - Elev. removed

 

Weight

 

12-Row 21” to 22”

 

320 hp min.

 

8 Roll w/rear Spiral Full Width

(Split rear smooth roll)

6 Groove Notched Powerband

 

24’ 11”

 

26’ 4" (24’ 11” boom removed.)

 

13’ 11”

 

 

13’ 4”

 

 

30,410 lbs (Tongue weight 10,580 lbs)

Overall Height:    13 feet & 6 inches

Shipping Height - Wheels & Top Sprocket removed:  12 Feet & 8 Inches

Rear Elevator Chain:  1/2 x 56" x 56 mm Triple Belt, Belted with overlap Splicing

Center Boom Height:       10 Feet & 5 Inches

 

Hopper Chain:  1/2 x 48" x 56 mm Belted with overlap Splicing

 

Lifter Wheels:  28" Cast Alloy steel with Driving lugs & Filler Tabs

Tank Holding Capacity:  Approximately 4 Tons

Grabroll Bearings:  2 3/16" Triple Lipped

Rear Carrier Tires:  4 each 21.5 x 16.1 Flotation

CONTACT US FOR SUPPORT

OPERATORS MANUALS

Call, Email, or Leave a short message on our Contact us page and we will answer any questions you might have

View a list of all our manuals for every year model you might have

Find and order Bearings, Belts, Rollers, and other common parts. We will ship it the same day of order if in stock. For other parts and more info please call.

Look through pictures of the 12-Row, its features, & capabilities. Also watch videos of the Parma 12-Row Sugarbeet Harvester in action

Special Features

Grabrolls

8 Total:

•  Back Grabroll is Full Length
  PTO Driven

Rear Elevator

56" Belted Chain For High Capacity

 

Copyright © Parma Company 2015 All rights reserved